SC 4060 Finishing Compound

SC 4060 Finishing Compound is designed to remove a 1200 grit sanding scratch and leave a high gloss finish with one compound. Quickly eliminate sanding marks, haze and holograms. Can be used with either rotary or dual action machines.

DIRECTIONS:

1200 to 3000 scratch.

• 1.Shake well. Work in the shade on a cool surface.
• 2.Apply a quarter size (1” diameter or 2.5 cm) amount of product to center of cutting pad. Before attaching pad to machine manually rub pad over the 2’ x 2’ area to evenly disperse compound.
• 3.Set rotary buffer to approximately 800-1000 RPM. Use cutting foam or wool pad. Set DA polisher to 4-5 ** See recommended pads below. Working a 2’ x 2’ section using moderate pressure to reduce the depth of the scratches to 3000
• 4. Wipe residue off with a clean, soft towel. DIRECTIONS: 3000 scratch to finish.
• 5. Apply a quarter size (1” diameter or 2.5 cm) amount of product to center of Finishing pad. Before attaching pad to machine manually rub pad over the 2’ x 2’ area to evenly disperse compound.
• 6. Set rotary buffer to approximately 800-1000 RPM. Use finishing foam. Set DA polisher to 4-5. For best results use Lamb’s Finishing Pad. Working a 2’ x 2’ section using moderate pressure to finish area to a brilliant shine.
• 7. Wipe residue off with clean, soft towel.